subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Power Antenna - Servicing|Page 617 > < Wiper Relay|Locations
Page 1
background image

Antenna Switch: Technical Service Bulletins
Power Antenna - Servicing

NUMBER: 15-96-92

DATE: 10-08-92

APPLICABILITY:
ALL MODELS EQUIPPED WITH A POWER ANTENNA

SUBJECT:
POWER ANTENNA SERVICING

Power antenna masts are available as separate replacement parts for all Subaru power antennas.

If you receive a customer complaint of improper power antenna operation, the cause may be a stuck, tight or binding mast.

The mast should be removed following the instructions which come with the part.

Inspect the removed mast.

1.

Check the mast by manually extending and contracting by hand. Visually inspect the mast. A tight or binding mast may be caused by being bent or
rusted. If either of these conditions exist, replace the mast.

2.

Inspect the antenna rope for possible damage, such as stripped teeth or breakage. If damage is found, replace the mast.

FLAT RATE INFORMATION

NOTE:
ANTENNA PARTS WHICH ARE BENT OR DAMAGED ARE NOT A HATTER FOR WARRANTY. NEVER REPLACE AN ANTENNA

Power Antenna - Servicing|Page 617 > < Wiper Relay|Locations