subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

All Technical Service Bulletins for Cruise Control Lever: > < Mud Flap - Installation Modification
Page 1
background image

Cruise Control Lever: Customer Interest
Cruise Control - Turn Signal Stalk Works Loose

15-41-87 
NUMBER

DATE

04-16-87

APPLICABILITY   1985/86 STATION WAGON, SEDAN, 3 DOOR

SUBJECT:

ACCESSORY CRUISE CONTROL

FIGURE 1

The accessory cruise control turn signal stalk screw may become loose after a period of time because of vibration. (Figure 1)

To prevent the loosening of this screw, remove it using a #0 Phillips screw driver, clean the threads, and apply 1 drop of Loctite Removable
Threadlocker 242 on the threaded portion of the screw and reinstall.

If the screw is removed for any service work after the application of Loctite, clean the threads and reapply the Loctite using the same procedure as above.
WARRANTY INFORMATION

Failure Code ZC0-23 Labor Operation 102-211 0.2

All Technical Service Bulletins for Cruise Control Lever: > < Mud Flap - Installation Modification