L-Series Sedan (4 Door) 2WD F4-1781cc 1.8L SOHC (MPFI) (1985)
FIGURE 3 - New Antenna Base Cap
3)
Place the new antenna base cap onto the antenna base and slide it in an upward direction parallel to the "a" pillar until it snaps into place.
(See Figure 3).
4)
Make sure the rubber antenna base is not stuck underneath the antenna base cap which it borders. (See Figure 3).
This operation has a time allowance of 0.2 hrs. and can be claimed under Operation Number A916-494 (Failure Code XGR-02,56).