subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Steering Gear|Service and Repair > < Key Reminder Switch|Locations
Page 1
background image

Steering Gear: Technical Service Bulletins
Steering Rack - Update & Special Tool Information

NUMBER  14-09-87

DATE 06-24-87
APPLICABILITY

1985 TO PRESENT; 4 DOOR, STATION WAGON AND 3 DR. COUPE MODELS EQUIPPED WITH POWER STEERING

SUBJECT:

POWER STEERING RACK REPAIR TOOL PART NUMBER 926390001

FIGURE 1

Power steering rack repair tool part number 926390000, the left hand rack cover, has been replaced by part number 926390001, which consists of the
left hand rack cover and the rack oil seal remover. The rack cover will not be available separately, however, the oil seal remover tool can be ordered
separately using part number 926410000 (See Figure 1). See General Precautions and Storage Instructions below figure 1.
A)

General Precautions:

^

To avoid deforming the cover tube, reinsert the remover into the cover after use.

^

Do not handle the cover by the tube section.

^

Do not apply force to the tube section.

^

Always insert the remover into the cover while holding the lower end (inlet side of the tube section).

B)

Storing Instructions:

^

The tube section of the cover is transparent. Ensure that the remover is fully inserted into the cover.

^

Always store the cover and the remover assembly in a cool, dark place. Recommendation: wrap the tool in a dark colored plastic bag before
placing the tools on the tool board.

^

Place the cover and the remover assembly on a flat surface. Do not stand on end.

Steering Gear|Service and Repair > < Key Reminder Switch|Locations