L-Series Sedan (4 Door) 4WD F4-1781cc 1.8L SOHC (SPFI) (1986)
Carburetor: Customer Interest
Carburetor - Hard Start When Warm
NUMBER:
02-51-86
DATE:
01-13-86
APPLICABILITY
1985 AND -86 4 DOOR SEDAN AND STATION WAGON
4WD CARBURETED VEHICLES EXCEPT CALIFORNIA MODELS
SUBJECT:
HOT ENGINE RESTARTING
Should you encounter a vehicle that is difficult to restart when the engine is hot, carburetur float chamber pressure may be the cause. Follow the
instructions for the installation of a carburetor vent control kit.
MATERIAL REQUIRED:
1 - Carburetor Vent Control Kit Part Number 16018AA000
Containing:
^
1 - Solenoid valve
^
1 - Canister vacuum hose stay
^
1 - Vacuum cap
^
1 - Vacuum tee
^
2 - Vacuum hoses, 3-3/8" long and 5-15/16" long
^
1 - Female electrical harness connector
^
1 - Wire tap quick connector
TOOLS REQUIRED
1 - Diagonal Cutter
1 - Needle Nose Pliers
1 - Ratchet with 10 mm, 12 mm Sockets and an extension
1 - 10 mm Combination Wrench
1 - Tape Measure or 12" Ruler
STEP 1)
^
Remove the negative battery terminal
^
Remove the spare tire assembly
^
Remove the air cleaner assembly