L-Series Wagon 4WD F4-1781cc 1.8L SOHC (Carb) (1987)
6.
Adjust neutral position as follows:
a. Insert a suitable bar through shifter arm hole and shift into 3rd gear position. The shifter arm should turn lightly toward 1st/2nd gear side but
heavily toward reverse. Make adjustment so reverse side heavy stroke becomes same as 1st/2nd side light stroke.
b. To adjust, remove plug on transfer case and change thickness of aluminum gasket.
7.
Fill internal groove of clutch release bearing holder with grease, then install clutch release fork and bearing holder and secure with return springs.
8.
Install transmission.