Legacy F4-2.5L SOHC (2003)
Evaporator Core: Service and Repair
Disassembly and Assembly
INTAKE UNIT
DISASSEMBLY
1. Remove resistor (A) and thermistor (B) from intake unit case.
2. Remove screws and clips to separate intake unit.
3. Remove expansion valve (A) from evaporator.
CAUTION: If evaporator is replaced, add appropriate amount of compressor oil to evaporator. <Ref. to REPLACEMENT, Compressor Oil.>
ASSEMBLY
Assemble in the reverse order of disassembly.
CAUTION: Replace O-rings with new ones, and then apply compressor oil.
