Legacy F4-2.5L SOHC (2003)
Cabin Air Filter: Service and Repair
* NOTE: SUBARU Does not show a procedure for service of this optional component for the year 2003, this is the procedure for the prior
year.*
Cabin Air Filter (Option)
1. Remove glove box.
2. Disconnect resistor connector (a) and then remove cover (b) from the cooling unit (c) by removing the four clips (d)
3. Pull out filter (a).
4. Installation is in the reverse order of removal.
NOTE:
-
The passenger compartment side of each filter is marked with an arrow. Ensure the arrow points up.
-
Ensure each filter assembly's tongues and grooves fit the corresponding cooling unit and matching filter tongues and grooves.
-
Ensure no air leaks from the cooling unit through the cover.
5. Fill in the maintenance label with the replacement date and mileage.
NOTE: Install maintenance label (a) on the outside of the glove box as shown.
