Legacy F4-2.5L SOHC (2003)
ST 927080000 HUB STAND
CAUTION: Be careful not to hammer hub bolts. This may deform hub.
ASSEMBLY
1. Using ST, press new hub bolt into place.
CAUTION: Ensure hub bolt closely contacts hub.
Use a 12 mm (0.47 inch) hole in the ST to prevent hub bolt from tilting during installation.
ST 927080000 HUB STAND
2. Using ST1, ST2 and ST3, press hub unit bearing into hub.
ST1 927080000 HUB STAND
ST2 927450000 HUB INSTALLER
ST3 28499AE000 SPACER
CAUTION: Always press inner race when installing hub unit bearing.
Use a new hub unit bearing.
INSPECTION
Check the removed parts for wear and damage. If defective, replace with new ones.
CAUTION :If a bearing is faulty, replace it as a hub unit bearing.
