Legacy F6-3.0L (2005)
2. Remove the front pillar upper trim.
3. Remove the front inside scuff plate, rear inside scuff plate and center pillar lower trim.
4. Remove the cap on the upper side of pillar trim, and remove the bolt inside.
5. Remove the center pillar upper trim.
6. Remove the seat belt lower anchor bolt at center pillar lower port. (Driver's seat)
7. Refer to the removal procedure of "Front Seat Belt". (Passenger's seat). <Ref. to, OUTER SEAT BELT ASSEMBLY, REMOVAL, Front Seat
Belt>
INSTALLATION
Install in the reverse order of removal.