Legacy F6-3.0L (2005)
-
The table lists the nominal sectional areas and allowable currents of the wires.
CAUTION: When replacing or repairing a wire, be sure to use the same size and type of the wire which was originally used.
NOTE:
-
The allowable current in the table indicates the tolerable amperage of each wire at an ambient temperature of 40 °C (104 °F).
-
The allowable current changes with ambient temperature. Also, it changes if a bundle of more than two wires is used.
-
Each unit is either directly grounded to the body or indirectly grounds through a harness ground terminal. Different symbols are used in the
wiring diagram to identify the two grounding systems.
-
The ground points shown in the wiring diagram refer to the following:
NOTE: All wiring harnesses are provided with a ground point which should be securely connected.
