Legacy F6-3.0L (2005)
CAUTION:
^
Be careful not to mistake the location of the (A) and (B).
^
Use a new gasket.
6. Install the rear chain cover.
7. Install the crank sprocket.
8. Install the cam sprocket.
9. Install the timing chain assembly.
10. Install the front chain cover.
11. Install the crank pulley.
INSPECTION
1. Check the camshaft for bend, and repair or replace if necessary.
2. Check the journal for damage and wear. Replace if faulty.
3. Measure the outside diameter of camshaft journal. If the journal diameter is not within specifications, check the oil clearance.
4. Measurement of the camshaft journal oil clearance:
1
Clean the bearing caps and camshaft journals.
2
Place the camshafts on the cylinder head. (Without installing the valve rocker.)
3
Place a plastigauge across each of the camshaft journals.
4
Install the bearing cap.
NOTE: Do not turn the camshaft.
5
Remove the bearing caps.
