Legacy F6-3.0L (2005)
2
Install the routing of timing chain (LH) on idler sprocket (lower), water pump, exhaust cam sprocket (LH) and intake cam sprocket (LH).
NOTE: Check that the mark on timing chain (A) and cam sprocket (B) is aligned as same as aligned on crank sprocket.
3
Install the chain idler (upper).
4
Install the chain guide (LH: between cams).
Tightening torque: 6.4 Nm (0.65 kgf-m, 4.7 ft. lbs.)
NOTE: Use a new installing bolt.