Legacy F6-3.0L (2005)
Timing Chain: Service and Repair
Rear Chain Cover
REMOVAL
1. Remove the crank pulley.
2. Remove the front chain cover.
3. Remove the timing chain.
4. Remove the cam sprocket.
5. Remove the crank sprocket.
6. Remove the oil pump.
7. Remove the water pump.
8. Remove the rear chain cover.
NOTE: Installation bolt has seven different sizes. To prevent the confusion in installation, keep these bolts on container individually.
INSTALLATION
1. Remove the used liquid gasket from mating surface, and degrease it.
2. Apply liquid gasket to the matching surface of rear chain cover.
Liquid gasket: THREE BOND 1280B (Part No. K0877A018)
