Legacy F6-3.0L (2005)
Condenser HVAC: Service and Repair
Condenser
REMOVAL
1. Using the refrigerant recovery system, discharge refrigerant.
2. Disconnect the ground cable from battery.
3. Disconnect the pressure hose and pipe from condenser.
4. Remove the radiator bracket (A) and hood stay (B).
5. Remove the front grille.
6. Remove two bolts. While lifting condenser, pull it out through the space between radiator and radiator panel.
CAUTION:
-
Be careful not to damage the condenser fins.
If a damaged fin is found, repair it using a thin screwdriver.
-
If the condenser is replaced, add an appropriate amount of compressor oil to the compressor.
INSTALLATION
