subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Information Bus|Testing and Inspection > < Technician Safety Information
Page 1
background image

Information Bus: Vehicle Damage Warnings

CAUTION

1. SRS AIRBAG SYSTEM

Airbag system wiring harness is routed near the body integrated unit and twisted pair line.

CAUTION: 
-

All airbag system wiring harness and connectors are colored yellow. Do not use the electrical test equipment on these circuits.

-

Be careful not to damage the Airbag system wiring harness when servicing the body integrated unit and LAN system.

2. LAN SYSTEM

-

Bus line of LAN system is twisted pair line. Be careful not to bypass or partly unbind the twisted pair line.

-

Do not make clearance between bus lines (CAN High, CAN Low).

-

Difference of bus line length should be within 10 cm (3.94 in).

-

Fray near the connector should be within 8 cm (3.14 in).

-

If the characteristics of the twisted pair line is changed, it may cause extremely weakness to the noise.

-

When repairing the harness, connect the wires using soldering and protect it with insulating tape, etc.

Information Bus|Testing and Inspection > < Technician Safety Information