subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Sensors and Switches - Powertrain Management > < Ignition Control Module|Locations
Page 1
background image

Ignition Control Module: Service and Repair

Ignition Coil and Ignitor Assembly

REMOVAL

Direct ignition type has been adopted. Refer to "Spark Plug" for removal procedure.

INSTALLATION

Install in the reverse order of removal.

Tightening torque:  16 N.m (1.6 kgf-m, 11.7 ft-lb)

Sensors and Switches - Powertrain Management > < Ignition Control Module|Locations