Legacy F6-3.0L (2005)
INSTALLATION
CAUTION:
-
Refer to "CAUTION" of General Description before handling the airbag module.
-
Be sure to perform the system calibration for occupant detection system after passenger's seat installation.
1. Ensure that there are no foreign articles on side airbag module.
2. Install the side airbag module (A) to backrest frame assembly.
3. Install the side airbag harness to backrest frame assembly.
NOTE: Secure the harness to its original position of seat.
4. Install the backrest cover.
5. Install the side airbag harness to slide rail IN (A), and then secure the connector to the bracket on back side of seat cushion assembly.