Legacy F6-3.0L (2005)
Air Bag Control Module: Service and Repair
Curtain Airbag Module
Curtain Airbag Module
REMOVAL
CAUTION: Refer to "CAUTION" of General Description before handling the airbag module.
1. Turn the ignition switch to OFF.
2. Disconnect the ground cable from battery and wait for at least 20 seconds before starting work.
3. Remove the rear quarter trim. (Sedan model)
4. Remove the quarter rear pillar trim. (Wagon model)
5. Disconnect the curtain airbag module connector.
-
Sedan model
-
Wagon model
6. Remove the roof trim.
7. Remove the bolts (A) and clips (B), and then remove the curtain airbag module.
CAUTION:
-
Be careful not to damage the curtain airbag module during removal.
-
Never open the curtain airbag module before deploying it. Never reuse the opened curtain airbag module.
-
Sedan model
