Legacy F6-3.0L (2005)
^
Do not apply excessive force to the sensor harness.
INSTALLATION
Install in the reverse order of removal.
CAUTION: Be careful not to damage the sensor portion.
Tightening torque:
Sensor: 7.5 Nm (0.76 kgf-m, 5.5 ft. lbs.)
Bracket: 33 Nm (3.3 kgf-m, 24 ft. lbs.)
NOTE: Check the identification (mark) on the harness to make sure that no warp exists. (RH:K5(White), LH:K6(Yellow))
INSPECTION
ABS WHEEL SPEED SENSOR
Refer to ABS wheel speed sensor inspection. See: Testing and Inspection/Front ABS Sensor
