Legacy F6-3.0L (2005)
Tire Pressure Module: Service and Repair
Removal
Tire Pressure Monitoring System
REMOVAL
TRANSMITTER (TIRE PRESSURE SENSOR)
1. Remove the wheels from vehicle.
2. Bleed air from tire valve.
3. Remove the nut, and drop the transmitter in the tire.
4. Remove the tires from wheels.
CAUTION: Use a tire changer when removing tire from wheel.
5. Remove the nut to take out transmitter.
NOTE: Replace the grommet with a new one when reusing transmitter.
TIRE PRESSURE MONITORING CONTROL MODULE
1. Remove the driver's seat.
2. Turn up the floor mat in the driver's seat area.
3. Remove the connector to remove tire pressure monitoring control module.
