Legacy F6-3.0L (2005)
Perform the following inspection procedures and replace defective parts.
SERVICE LIMIT
Make a measurement as follows. If it exceeds the service limit, replace with a new one.
CAUTION:
^
When securing the oil pump on a vice, hold the oil pump with the least possible force between two wood pieces.
^
Do not set outside of flow control valve or pulley on a vice; otherwise outside or pulley might be deformed. Select properly sized wood pieces.
1. Play of the pulley shaft
Condition: P: When applying the force of 9.8 N (1.0 (kgs, 2.2 lbs.)
Service limit:
Radial play (Direction <- -> )
0.4 mm (0.016 inch) or less
