Legacy F6-3.0L (2005)
Steering Gear: Service and Repair
Disassembly
The content of this article/image reflects the changes Identified in
TSB # 18-97-06
as of 01/04/06
and applies to 2005 Legacy and Baja models
Steering Gearbox
DISASSEMBLY
RACK HOUSING ASSEMBLY
1. Disconnect the four pipes from gearbox.
NOTE: Remove the pipes C and D, which are fixed to clamp plate, as a single unit.
2. Secure the gearbox removed from vehicle in vice using ST.
ST1 926200000 STAND
ST2 34199AG000 BOSS D
CAUTION: Secure the gearbox in a vise using ST as shown. Do not attempt to secure it without this ST.
3. Remove the tie-rod end and lock nut from gearbox.
4. Remove the small clip from the boot using pliers and then move the boot to tie-rod end side.
