subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Wheels and Tires|Wheels > < Tire Pressure Sensor|Removal|Page 4159
Page 1
background image

Spare Tire: Service and Repair

"T-type" Tire 

NOTE

"T-type" tire for temporary use is prepared as a spare tire.

CAUTION:  
^

Do not drive at a speed greater than 100 km/h (62 MPH).

^

For the model with tire pressure monitoring system, the indicator light may blink when running with the "T-type" tire.

REPLACEMENT

Refer to Steel Wheel for installation procedure of "T-type" tire.

CAUTION:  Replace with a conventional tire as soon as possible since the "T-type" tire is only for temporary use.

INSPECTION 

1.  Check the tire air pressure.

Specifications: 420 kPa (4.2 kgf-cm2, 60 psi)

2. Take the stones, glass, nails, etc. out of the tread groove.
3. Check the tires for deformation, cracks, partial wear or wear.

CAUTION:  Replace the tire with a new one if defective.

Wheels and Tires|Wheels > < Tire Pressure Sensor|Removal|Page 4159