Legacy F6-3.0L (2005)
Fluid Line/Hose: Service and Repair
ATF Cooler Pipe and Hose
ATF Cooler Pipe and Hose
REMOVAL
1. Set the vehicle on a lift.
2. Remove the battery.
3. Lift-up the vehicle.
4. Remove the under cover.
5. Remove the radiator under cover.
6. Disconnect the ATF cooler hose from radiator.
NOTE:
^
Do not use a screwdriver or other pointed tools.
^
When hard to remove the hose, wrap the hose with cloth to prevent from damaging, and then turn with pliers and pull out with hand straightly.
7. Disconnect the ATF cooler hoses from pipes.
NOTE:
^
Do not use a screwdriver or other pointed tools.
^
When hard to remove the hose, wrap the hose with cloth to prevent from damaging, and then turn with pliers and pull out with hand straightly.