Legacy F6-3.0L (2005)
14. Tighten the self-locking nut within the specified torque range so that the turning resistance of companion flange becomes the same as that of before
oil seal replacement.
ST 498427200 FLANGE WRENCH
NOTE: Use a new self-locking nut.
Tightening torque:
T-type: 181 Nm (18.5 kgf-cm, 134 ft. lbs.)
VA-type: 191 Nm (19.5 kgf-cm, 141 ft. lbs.)
15. Hereafter, reassemble in the reverse order of disassembly.
