Legacy Brighton Wagon AWD F4-2.2L SOHC (1997)
Vacuum Brake Booster: Service and Repair
Installation
INSTALLATION
1) Mount brake booster in position.
2) Connect operating rod to brake pedal with clevis pin and snap pin.
3) Connect vacuum hose to brake booster.
4) Mount master cylinder onto brake booster.
5) Connect brake pipes to master cylinder.
6) Connect electric connector for brake fluid level indicator.
7) Adjust operating rod of brake booster.
Standard: L
145.3 mm (5.72 in)
If it is not in specified value, adjust it by adjusting brake booster operating rod.
8) Measure the clearance between threaded end of stop light switch and stopper.
If it is not in specified value, adjust it by adjusting position of stop light switch.
