Legacy Brighton Wagon AWD F4-2.2L SOHC (1997)
6.
Remove bolts which install throttle body to intake manifold.
7.
Installation is in the reverse order of removal.
CAUTION:
Use the new gasket supplied.
Throttle body mounting bolt torque:
22 +/- 2 N-m (2.2 +/- 0.2 kg-m, 15.9 +/- 1.4 ft-lb)
8.
Confirm proper adjustment of the throttle position sensor using the Subaru select monitor.
Specification:
Throttle plate fully closed.
Throttle opening angle 0.00%.
Throttle sensor voltage 0.45 - 0.55V.
Throttle position sensor mounting screw torque:
2.2 +/- 0.2 N-m (0.22 +/- 0.02 kg-m, 1.6 +/- 0.1 ft-lb)
CLAIMS REIMBURSEMENT AND ENTRY PROCEDURES
Credit to perform this recall will be based on the submission of properly completed repair order information. Dealers may enter the applicable claim
information through their Dealer Communication System (DCS).
All properly submitted claims will receive an automatic credit of 0.2 labor hours for inspection.
Claims that require Throttle Body assembly replacement will be credited a total of 0.5 labor hours. This includes 0.2 hours for inspection and 0.3 hours
for replacement. Parts will be reimbursed at suggested list price.
Listed is claim entry information.
