subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Keyless Entry - Remote Transmitter Service Tip|Page 5107 > < Keyless Entry - Remote Transmitter Service Tip|Page 5105
Page 2
background image

CHECK:Does the LED blink one time?

YES:

Go to step 2B5.

NO:

Replace transmitter.

2B5: CHECK LED OF TRANSMITTER.

Keep the UNLOCK/DISARM button pressed.

CHECK:Does the LED blink two times?

YES:

Go to step 2B6.

NO:

Replace transmitter.

2B6: CHECK POWER DOOR LOCK FUNCTION.

Perform lock and unlock function of power door lock with transmitter.

CHECK:Does it function normally?

YES:

Go to step 2B7.

NO:

Replace transmitter.

2B7: CHECK ON/OFF SELECT HORN SIGNAL.

Press the LOCK/ARM or UNLOCK/DISARM button.

CHECK:Does the horn signal chirp?

YES:

Go to step 2B8.

NO:

keep both LOCK/ARM and UNLOCK/ DISARM buttons pressed for more than 1.5 seconds. Go to step 2B8.

2B8: CHECK ON/OFF SELECT HORN SIGNAL.

Keep both LOCK/ARM and UNLOCK/DISARM buttons pressed for more than 1.5 seconds.

CHECK:Does the horn signal chirp two times?

YES:

Go to step 2B9.

NO:

Replace transmitter.

2B9: CHECK ON/OFF SELECT HORN SIGNAL.

Press LOCK/ARM or UNLOCK/DISARM button.

CHECK:Does the horn signal chirp?

YES:

Replace transmitter.

NO:

Go to step 2B10.

2B10: CHECK ON/OFF SELECT HORN SIGNAL.

keep both LOCK/ARM and UNLOCK/DISARM buttons pressed for more than 1.5 seconds.

CHECK:Does the horn signal chirp one time?

YES:

go to step 2B11.

NO:

Replace transmitter.

2B11: CHECK ON/OFF SELECT HORN SIGNAL.

Press LOCK/ARM and UNLOCK/DISARM button.

CHECK:Does the horn signal chirp?

Keyless Entry - Remote Transmitter Service Tip|Page 5107 > < Keyless Entry - Remote Transmitter Service Tip|Page 5105