Legacy Brighton Wagon AWD F4-2.5L SOHC (2000)
License Plate Bracket: Technical Service Bulletins
Front License Plate - Installation
NUMBER: 01-149-99
DATE: 09/20/99
APPLICABILITY:
2000 MY Legacy
SUBJECT:
Front License Plate Mounting
When installing a front license plate onto the 2000 MY Legacy, we recommend the following:
1.
Use self-tapping screws. Sizes recommended are shown.
2.
Do not drill a pilot hole into the bumper skin. Allow the self-taping screw to do its job and make its own hole.
3.
Tighten the screws by hand and do not over tighten them.
Please ensure all necessary personnel are informed of this important information.
