Legacy Brighton Wagon AWD F4-2.5L SOHC (2000)
12. Connect hoses to purge control solenoid valve.
CAUTION: Carefully connect the evaporation hoses.
13. Install engine harness onto intake manifold.
14. Connect connectors to fuel injectors and purge control solenoid valve.
15. Hold engine harness by harness band (*)
N0TE: Do not use harness band on harnesses where they are supposed to be protected by the fuel pipe protector.
16. Install intake manifold protector RH.
Tightening torque:
T1: 18.6 ± 1.5 N.m (1.9 ± 0.15 kg.m, 13.7 ± 1.1 ft.lb)
T2: 19 ± 2 N.m (1.9 ± 0.2 kg.m, 13.7 ± 1.4 ft.lb)
17. Install intake manifold protector LH.
