Legacy Brighton Wagon AWD F4-2.5L SOHC (2000)
Fuel Gauge: Service and Repair
Fuel Level Sensor
WARNING:
-
Place "NO FIRE" signs near the working area.
-
Be careful not to spill fuel on the floor.
-
During work procedures, if fuel tank is more than 3/4 full, be careful because fuel may spill.
NOTE: Fuel level sensor is built in fuel pump assembly.
1. Remove fuel pump assembly.
2. Disconnect connector from fuel pump bracket.
3. Pushing the pawls with a screwdriver, remove fuel meter unit by pulling it downwards.
NOTE: Replace fuel filter pawls with new ones as they might brake when removed.
4. Installation is in the reverse order of removal.
WARNING:
-
Ground cable must be connected.
-
Spark may occur and ignite if fuel is nearby.