Legacy Brighton Wagon AWD F4-2.5L SOHC (2000)
-
When disconnecting pipe C D, use two wrenches to prevent deformities.
-
Be careful to keep pipe connections free from foreign matter.
6. Remove bolt A. Disconnect pipe C from oil pump. Disconnect pipe D from return hose.
CAUTION: Do not allow fluid from the hose end to come into contact with pulley belt.
To prevent foreign matter from entering the hose and pipe, cover the open ends of them with a clean cloth.
CHECK
Check all disassembled parts for wear, damage or other abnormalities. Repair or replace faulty parts as required.
INSTALLATION
1. Connect pipes C and D to steering gearbox.
Tightening torque:
Joint nut 15 ± 5 Nm (1.5 ± 0.5 kg-m, 10.8 ± 3.6 ft. lbs.)
CAUTION: Visually check that hose between tank and pipe D is free from bending or twisting.
2. Connect pipe D to oil tank.
3. Connect pipe C to oil pump.
CAUTION: Use a new gasket.