Legacy Brighton Wagon AWD F4-2.5L SOHC (2000)
Tightening torque:
35 N.m (3.6 ± 0.5 kg.m, 26.0 ± 3.6 ft.lb)
6. Connect connector to rear oxygen sensor connector.
7. Install under cover.
8. Lower the vehicle.
9. Connect front oxygen (A/F) sensor connector.
10. Connect battery ground cable.
NOTE: The rear catalytic converter is integrated with front catalytic converter. Therefore, the procedure for installing rear catalytic converter is
the same as the description above.