Legacy Brighton Wagon AWD F4-2.5L SOHC (2000)
NO:
Go to step 5K8.
5K6: AIRBAG MAIN HARNESS AND FRONT SUB SENSOR HARNESS (RH) INSPECTION
Measure resistance across test harness I or I2 connector (3I) terminal and chassis ground.
CHECK: Is the resistance more than 10 ohms?
YES:
Go to step 5K7.
NO:
Go to step 5K8.
5K7: AIRBAG MAIN HARNESS AND FRONT SUB SENSOR HARNESS
(RH) INSPECTION
Measure resistance across test harness I or I2 connector (3I) terminal and chassis ground.
CHECK: Is the resistance more than 10 K ohms?
YES:
Go to step 5K16.
NO:
Go to step 5K8.
5K8: AIRBAG MAIN HARNESS INSPECTION
1. Disconnect connector (AB14) and (AB15), then connect test harness F connector (2F) and connector (AB14).
2. Measure resistance between test harness I or I2 connector (3I) terminal and test harness F connector (3F) terminal.
CHECK:Is the resistance less than 10 ohms?
YES:
Go to step 5K9.