Legacy Brighton Wagon AWD F4-2.5L SOHC (2000)
Measure resistance across test harness F connector (3F) terminal and chassis ground.
CHECK: Is the resistance more than 10 ohms?
YES:
Go to step 5L15.
NO:
Replace front sub sensor harness (LH).
5L15: FRONT SUB SENSOR HARNESS (LH) INSPECTION
Measure resistance across test harness F connector (3F) terminal and chassis ground.
CHECK: Is the resistance more than 10 K ohms?
YES:
Go to step 5L16.
NO:
Replace front sub sensor harness (LH).
5L16: FRONT SUB SENSOR (LH) INSPECTION
1. Connect test harness H connector (2H) and front sub sensor (LH).
2. Measure resistance between test harness H connector (3H) terminal.
CHECK: Is the resistance between 750 ohms and 1 K ohms?
YES:
Go to step 5L17.
NO:
Replace front sub sensor (LH).
5L17: FRONT SUB SENSOR (LH) INSPECTION