Legacy Brighton Wagon AWD F4-2.5L SOHC (2000)
Measure resistance across test harness I or I2 connector (3I) terminal and chassis ground.
CHECK: Is the resistance more than 10 K ohms?
YES:
Go to step 5L12.
NO:
Replace airbag main harness.
5L12: FRONT SUB SENSOR HARNESS (LH) INSPECTION
1. Connect test harness F connector (1F) and connector (AB12).
2. Disconnect connector (AB13) from front sub sensor (LH) and then test harness H connector (1H) and connector (AB13).
3. Measure resistance between test harness F connector (3F) terminal and test harness H connector (3H) terminal.
CHECK: Is the resistance less than 10 ohms?
YES:
Go to step 5L13.
NO:
Replace front sub sensor harness (LH).
5L13: FRONT SUB SENSOR HARNESS (LH) INSPECTION
Measure resistance between test harness F connector (3F) terminal and test harness H connector (3H) terminal.
CHECK: Is the resistance less than 10 ohms?
YES:
Go to step 5L14.
NO:
Replace front sub sensor harness (LH).
5L14: FRONT SUB SENSOR HARNESS (LH) INSPECTION
