Legacy Brighton Wagon AWD F4-2.5L SOHC (2000)
5. Measure resistance between test harness I or I2 connector (3I) terminal and test harness G connector (3G) terminal.
CHECK: Is the resistance less than 10 ohms?
YES:
Go to step 5Q2.
NO:
Replace side airbag harness (RH).
5Q2: SIDE AIRBAG HARNESS (RH) INSPECTION
Measure resistance between test harness I or I2 connector (3I) terminal and test harness G connector (3G) terminal.
CHECK: Is the resistance less than 10 ohms?
YES:
Go to step 5Q3.
NO:
Replace side airbag harness (RH).
5Q3: SIDE AIRBAG HARNESS (RH) INSPECTION
Measure resistance between test harness I or I2 connector (3I) terminal and test harness G connector (3G) terminal.
CHECK: Is the resistance less than 10 ohms?
YES:
Go to step 504.