Legacy GT LTD Sedan AWD F4-2.5L DOHC (1998)
Hazard Warning Lamps: Service and Repair
Removal and Installation
Turn Signal and Hazard Warning Light
1. FRONT TURN SIGNAL LIGHT
Refer to removal and installation of front turn signal light.
NOTE: The front turn signal light is united with headlight assembly.
2. REAR COMBINATION LIGHT
Refer to removal and installation of rear combination light.
3. COMBINATION SWITCH
Refer to removal and installation of combination switch.
4. HAZARD SWITCH
1. Remove center panel from instrument panel.
2. Disconnect connector of hazard switch from body harness.
3. Remove hazard switch from center panel.
5. TURN SIGNAL AND HAZARD UNIT
1. Remove instrument panel lower cover.
2. Remove engine hood opener lever bracket.
3. Disconnect connector of turn signal and hazard unit.
4. Remove screw, and then remove turn signal and hazard unit from bracket.
