Legacy GT LTD Sedan AWD F4-2.5L DOHC (1998)
Throttle Body: Service and Repair
THROTTLE BODY
REMOVAL AND INSTALLATION
1) Loosen clamps which connect air intake duct to air intake chamber and mass air flow sensor.
2) Disconnect blow-by hose from air intake duct.
3) Remove air intake duct.
4) Loosen clamp which connects air intake chamber to throttle body.
5) Disconnect air hoses, and remove air intake chamber.
6) Disconnect accelerator cable 1.
7) Disconnect cruise control cable 2. (With cruise control model)
8) Disconnect connector from throttle position sensor.