Legacy GT LTD Sedan AWD F4-2.5L DOHC (1998)
Front Sub Sensor: Symptom Related Diagnostic Procedures
03 Front Sub Sensor / Sensor Harness Is Faulty
DIAGNOSIS:
-
Front sub sensor harness is faulty.
-
Front sub sensor is faulty.
CAUTION: Before performing diagnostics on airbag system, turn ignition switch "OFF", disconnect battery ground terminal, and then wait at least 20
seconds.
5B1: FRONT SUB SENSOR (RH) AND FRONT SUB SENSOR HARNESS (RH) INSPECTION
1. Disconnect connector (AB6) from airbag control module, and connect it to test harness E connector (1E).
2. Measure resistance between test harness E connector (3E) terminal.
CHECK: Is the resistance between 750 Ohms and 1 K Ohm
YES:
Go to step 5B2.
NO:
Go to step 5B2.
5B2: FRONT SUB SENSOR (RH) AND FRONT SUB SENSOR HARNESS (RH) INSPECTION
Measure resistance across test harness E connector (3E) terminal and chassis ground.
CHECK: Is the resistance more than 10 K Ohms?
YES:
Go to step 5B3.
NO:
Go to step 5B3.
5B3: FRONT SUB SENSOR (RH) AND FRONT SUB SENSOR HARNESS (RH) INSPECTION
