Legacy GT LTD Sedan AWD F4-2.5L DOHC (1998)
Measure resistance across test harness F connector (3F) terminal and chassis ground.
CHECK: Is the resistance more than 10 K Ohms?
YES:
Go to step 5B15.
NO:
Replace front sub sensor harness (RH).
5B15: FRONT SUB SENSOR (RH) INSPECTION
1. Connect test harness H connector (2H) and front sub sensor (RH).
2. Measure resistance between test harness H connector (3H) terminal.
CHECK: Is the resistance between 750 Ohms and 1 K Ohm?
YES:
Go to step 5B16.
NO:
Replace front sub sensor (RH).
5B16: FRONT SUB SENSOR (RH) INSPECTION
Measure resistance between test harness H connector (3H) terminal and chassis ground.
CHECK: Is the resistance more than 10 K Ohm?
YES:
Go to step 5B17.
NO:
Replace front sub sensor (RH).
5B17: FRONT SUB SENSOR (RH) INSPECTION
