Legacy GT LTD Sedan AWD F4-2.5L DOHC (1998)
5B20: AIRBAG MAIN HARNESS INSPECTION
Measure resistance across test harness E connector (3E) terminal and chassis ground.
CHECK: Is the resistance more than 10 K Ohms?
YES:
Go to step 5B21.
NO:
Replace airbag main harness.
5B21: AIRBAG MAIN HARNESS INSPECTION
Measure resistance across test harness E connector (3E) terminal and chassis ground.
CHECK: Is the resistance more than 10 K Ohms?
YES:
Go to step 5B22.
NO:
Replace airbag main harness.
5B22: FRONT SUB SENSOR HARNESS (LH) INSPECTION
1. Connect test harness F connector (1F) and connector (AB12).
2. Disconnect connector (AB13) from front sub sensor (LH) and then test harness H connector (1H) and connector (AB13).
3. Measure resistance between test harness F connector (3F) terminal and test harness H connector (3H) terminal.
CHECK: Is the resistance less than 10 Ohms?
YES:
Go to step 5B23.
