Legacy GT LTD Sedan AWD F4-2.5L DOHC (1998)
CAUTION: When removing the DOJ from the rear differential, fit tire lever to the bolt as shown in figure so as not to damage the axle shaft
holder.
10) Remove DOJ and BJ boots from drive shaft.
B: INSTALLATION
1) Install DOJ and BJ boots to drive shaft.
2) Replace circlips from DOJ spline with new one. (2200 cc AT vehicles only)
3) Using ST, install DOJ into differential.
ST 28099PA090 SIDE OIL SEAL PROTECTOR
4) Insert DOJ spline end into bore of side oil seal, QT and remove, 31.
CAUTION: Do not allow DOJ splines to damage side oil seal.
ST 28099PA090 SIDE OIL SEAL PROTECTOR
5) Align DOJ and differential splines.
6) Push housing to insert DOJ into differential.
