subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Brake Proportioning/Combination Valve > < Brake Hose|Page 4547
Page 1
background image

Brake Hose/Line: Service and Repair
Brake Line

REMOVAL 

NOTE:  Airbag system wiring harness is routed near the center brake pipe.

CAUTION: 
-

All Airbag system wiring harness and connectors are colored yellow. Do not use electrical test equipment on these circuits.

-

Be careful not to damage Airbag system wiring harness when servicing the center brake pipe.

-

When removing the brake pipe, make sure that it is not bent.

INSTALLATION 

NOTE:  Airbag system wiring harness is routed near the center brake pipe.

CAUTION: 
-

All Airbag system wiring harness and connectors are colored yellow. Do not use electrical test equipment on these circuits.

-

Be careful not to damage Airbag system wiring harness when servicing the center brake pipe.

-

When installing the brake pipe, make sure that it is not bent.

-

After installing the brake pipe and hose, bleed the air.

-

After installing the brake hose, make sure that it does not touch the tire or suspension assembly, etc.
Brake pipe tightening torque:
15 Nm (1.5 kg-m, 10.8 ft. lbs.) 

Brake Proportioning/Combination Valve > < Brake Hose|Page 4547