Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
Measure the thrust clearance of camshaft with dial gauge. If the clearance exceeds the limit, replace camshaft support.
Standard: 0.030 - 0.090 mm (0.0012 - 0.0035 inch)
Limit: 0.11 mm (0.0043 inch)
C: INSTALLATION
1. CAMSHAFT (LH)
a) Apply a coat of engine oil to camshaft journals and install camshaft (LH).
b) Install camshaft cap.
(1) Apply liquid gasket on the around of camshaft cap.
Liquid gasket: THREE BOND 1280B (Part No. 0029431130)
(2) Temporarily tighten bolts (g) through (j) in alphabetical sequence.
(3) Install valve rocker assembly.
