Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
Oil Filter: Service and Repair
A: REMOVAL
1. Remove access lid.
2. Remove oil filter with ST.
ST 498547000 OIL FILTER WRENCH
B: INSTALLATION
1. Get a new oil filter and apply a thin coat of engine oil to the seal rubber.
2. Install oil filter by turning it by hand, being careful not to damage seal rubber.
3. Tighten more (approximately 2/3 to 3/4 turn) after the seal rubber contacts the oil pump case. Do not tighten excessively, or oil may leak.
