Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
3. Install belt idler (No. 2).
Tightening torque: 39 Nm (4.0 kgf-m, 28.9 ft. lbs.)
4. After ensuring that the marks on timing belt and camshaft sprockets are aligned, remove stopper pin from belt tensioner adjuster.
CAUTION: After properly installing timing belt, remove rocker cover and ensure that the valve lash adjuster contains no air.
5. Install timing belt guide. (MT vehicles only)
1) Temporarily tighten remaining bolts.
2) Check and adjust clearance between timing belt and timing belt guide by using thickness gauge.
Clearance: 1.0 ±0.5 mm (0.039 ±0.020 inch)
