Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
3) Tighten remaining bolts.
Tightening torque: 9.8 Nm (1.0 kgf-m, 7.2 ft. lbs.)
Crankshaft Pulley and Belt Cover
1. Install front belt cover.
Tightening Torque: 5 Nm (0.5kg-m, 3.6 ft. lbs.)
2. Install LH belt cover.
Tightening Torque: 5 Nm (0.5kg-m, 3.6 ft. lbs.)
3. Install crankshaft pulley.
4. Install pulley bolt
To lock crankshaft, use ST 499977100 Crankshaft Pulley Wrench.
a. Clean the crankshaft pulley thread using an air gun.
b. Apply engine oil to the crankshaft pulley bolt seat and thread.
c. Tighten the bolt temporarily with tightening torque of 44 Nm (4.5kg-m, 33 ft.lbs.)
d. tighten the crankshaft pulley bolt.
Tightening torque: 177 Nm (18.0 kg-m, 130.2 ft. lbs.)
e. Confirm that the tightening angle of the crankshaft pulley bolt is 65° or more, if not replace crankshaft pulley bolt.
Caution: Conduct the tightening procedures by confirming the turning angle of the crankshaft pulley bolt referring to the gauge indicated on the belt
cover.
