Legacy GT LTD Sedan AWD F4-2.5L SOHC (2001)
3) Disconnect washer motor connectors.
4) Move washer tank to forward.
5) Disconnect spark plug cords from spark plugs (#2 and #4 cylinders).
6) Disconnect PCV hose from rocker cover (LH).
7) Remove bolts, then remove rocker cover (LH).
10. Set #1 cylinder piston to top dead center of compression stroke by rotating crankshaft pulley clockwise using ST ST499977100 CRANKSHAFT
PULLEY WRENCH
NOTE: When arrow mark on camshaft sprocket (LH) comes exactly to the top, #1 cylinder piston is brought to the top dead center of
compression check.
11. Measure #1 cylinder valve clearance by using thickness gauge.
CAUTION:
^
Insert the thickness gauge in as horizontal a direction as possible with respect to the valve stem end face.
^
Measure exhaust valve clearances while lifting-up the vehicle.
Valve clearance:
Intake: 0.20 ±0.02 mm (0.0079 ±0.0008 inch)
Exhaust: 0.25 ±0.02 mm (0.0098 ±0.0008 inch)